介水仙頭問題, 請指教!!

各位好, 小弟第一次發帖, 請多多指教!!

去年開始, 小弟第一次買水仙頭自己浸, 但因唔識介, 所以叫鋪頭幫我介埋, 點知到佢生高時先知有d芽比佢介爛左, d葉生到變左型, 又唔靚, 所以今年決定買頭自己介, 請問各位可以教下我點樣落刀嗎? 點先可以唔會傷到花芽? 仲有, 睇過d舊post講浸頭至開花大約要20日左右, 今年大家會幾時開始浸呢? 多謝各位解答!!

你想介企頭，蟹爪定係其它？

For reference: 水仙雕刻
http://video.baidu.com/v?word=%C ... mp;s=0&fbl=1024
企頭is simple
After u remove the soil and brown foilage, u can try to touch on the major (large bulbs) to check where is the buds, try to cut between the buds, and on each face, u may need to cut 1-3 times.
And after the cutting, u need to immense the bulbs totally in water for 1 whole day.
After that, u need to wash away all the sticky clear liquid to prevent the browning of the bulbs, and u need to give the 水仙 sunshine, or some shortenin powder to prevent the too long stems!
And u can choose some larger bulbs to have stronger flower! bulbs ~$20 are very beautiful this year!

Hope u have nice and beautiful flower!
And Happy New Year!

你想介企頭，蟹爪定係其它？
fnv234 發表於 2010-1-8 19:49

234兄, 我想介企頭呀, 比d意見呀, 唔該晒!!

For reference: 水仙雕刻

企頭is simple
After u remove the soil and brown foilage, u can try to touch ...
adakong 發表於 2010-1-8 22:44

唔該晒, Ada!!

請問可否再講清楚d如何落刀? 是否按落去較硬就係花芽位? 還是凹落去既地方就係落刀位置? 謝謝解答!!

Usually, the hard place is bud, may be flower or not!
try to prevent to cut on the harden place, cut 1-2 times each face, and cut on both faces!

Shopkeeper at Fa Hui said that this year you can start to cut & immense the Nar on 22/1/10!

回復 5# 嘩哈哈
你可以下刀大約1-1.5CM深, 讓花菖出來, 若果你驚不懂下刀位置及深淺, 可以早D買$10/ $5個的細水仙頭來試試浸!
好好玩的!

Shopkeeper at Fa Hui said that this year you can start to cut & immense the Nar on 22/1/10!
adakong 發表於 2010-1-10 19:32

Thanks, 睇黎我今年入早左好多!!

回復  嘩哈哈
你可以下刀大約1-1.5CM深, 讓花菖出來, 若果你驚不懂下刀位置及深淺, 可以早D買$10/ $5個的 ...
adakong 發表於 2010-1-11 11:16

請問介開適當的位置後, 是否會見到花菖? 而花菖又係點樣既呢?

回復 10# 嘩哈哈
見唔到花菖的! CUT左後, 要浸左水之後, 先知CUT得夠唔夠開, 唔夠加多一刀, 好易的!
段估無辛苦!
要見到花菖, 要介蟹爪了!
介過蟹爪後, 原來花菖都好入, 要CUT好多層鱗片先見到真正的花菖!

我都買左兩個水仙頭, 今年都黎玩下Cut水仙頭, 我都唔識o架,
蟹爪太複雜了, 企頭應該唔會太難,
搵到個網頁參考下http://www2.hkedcity.net/sch_fil ... tanyn02.htm#001/url]:

請問各位, 如想用泥種水仙, 要在新年有花睇, 幾時開始種最好呢? 使唔使好似企頭咁介幾刀? 謝謝!

Thanks, 睇黎我今年入早左好多!!
嘩哈哈 發表於 2010-1-11 11:53

花農提示:  如已購買, 原裝擺係到(即連泥, 放到咁上下時間. 就介&浸)

多謝各位回覆, 今年六個水仙頭順利介開, 於一月廿日開始浸, 明天剛二星期, 但睇黎心急得滯, 因昨日已見花蕾, 應該未到過年已經開晒花.....(@o@)"

希望年初三前唔好謝!!

我會好仔細咁逐層逐少逐少
幾多側芽都唔會傷

我上個星期六(1月30日)先買 0黎浸！買 0左一盒/$98/20個頭自己 (界刂)！遲 0的先 post 0的相上 0黎！我有信心新年前開到花﹐因為我平時年浸 0個 0的都係除夕開花 0既！

[img]http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs127.snc3/17435_1190589286050_1267904704_30447626_6504239_n.jpg[img][/img]http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs127.snc3/17435_1190589326051_1267904704_30447627_7034035_n.jpg[/img]
今既再貼呢幾日 0既生長狀況！

1月31日
2月1日
2月2日
2月3日